Les meilleures RedHat RH-202 examen pratique questions et réponses

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test RedHat RH-202 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test RedHat RH-202, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Si vous faites toujours la lutte contre le test RedHat RH-202, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de RedHat RH-202. Si vous avez déjà décidé à s'améliorer via RedHat RH-202, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Le produit de Pass4Test peut assurer les candidats à réussir le test RedHat RH-202 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Code d'Examen: RH-202
Nom d'Examen: RedHat (Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs))
Questions et réponses: 171 Q&As

RH-202 Démo gratuit à télécharger: http://www.pass4test.fr/RH-202.html

NO.1 quotaon -u /data

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.2 Make Successfully Resolve to server1.example.com where DNS Server is 192.168.0.254.
Answer: 1. vi /etc/resolv.conf

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.3 swapon /dev/hda? To enable the Swap space from partition.

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.4 mkswap /dev/hda? To create Swap File system on partition.

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.5 touch /data/aquota.user

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.6 Either Reboot or use partprobe command.

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.7 Press w to write on partitions table.

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.8 quotacheck -ufm /data

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.9 Reboot the System and verify that swap is automatically enabled or not.
10. You are a System administrator. Using Log files very easy to monitor the system. Now there are 50
servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from all servers
into on LOG Server. How will you configure the LOG Server to accept logs from remote host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log
from other host configure:
1. vi /etc/sysconfig/syslog SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
2. service syslog restart

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.10 vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.11 edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
3. One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing
any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equalsized chunks known as Physical Extents
(PE). As there are several other concepts associated with the LVM system, let's start with some basic
definitions:
Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume
is a standard primary or logical partition. It can also be a RAID array.
Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs.
Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home and /var
on an LV.
Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. ext2online -d /dev/vg0/lv1 to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
4. Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.12 Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main
task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root
password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode. You can pass
the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But
you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's
giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already
done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a
router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.13 Quota is implemented on /data but not working properly. Find out the Problem and implement the quota
to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems.
Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem.
Once the affected partition is full, other users are effectively denied upload access to the disk. This is also
a reason to mount different filesystem directories on different partitions. For example, if you only had
partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all
of the space in your root directory (/). Without at least a little free space in the root directory (/), your
system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobytesized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system.
Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab /dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.14 vi /etc/fstab /dev/hda? swap swap defaults 0 0

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.15 free -m Verify Either Swap is enabled or not.

RedHat   RH-202   RH-202 examen   RH-202 examen

NO.16 Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.

RedHat   RH-202   RH-202 examen   RH-202 examen

Il y a nombreux façons à vous aider à réussir le test RedHat RH-202. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test RedHat RH-202 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test RedHat RH-202 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

Pass4Test offre une formation sur RedHat RH133 matériaux examen

Le test RedHat RH133 est l'un très improtant dans tous les tests de Certification RedHat, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Le test RedHat RH133 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test RedHat RH133. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test RedHat RH133. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Code d'Examen: RH133
Nom d'Examen: RedHat (Red Hat Linux System Administration)
Questions et réponses: 336 Q&As

Vous pouvez télécharger tout d'abord une partie de Q&A Certification RedHat RH133 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test RedHat RH133. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Passer le test RedHat RH133, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification RedHat RH133. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification RedHat RH133.

En quelques années, le test de certification de RedHat RH133 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de RedHat RH133? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification RH133. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification RH133, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.

RH133 Démo gratuit à télécharger: http://www.pass4test.fr/RH133.html

NO.1 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. He is working as a root user on the Linux operating system. He wants to add a soft limit quota
warning for the users, in which, after exceeding the quota value, a user will receive e-mail warnings about
being over quotA. Which of the following commands will John use to accomplish his task?
Each correct answer represents a complete solution. Choose all that apply.
A. repquota
B. quotaon
C. warnquota
D. edquota
E. quotaoff
Answer: C,D

RedHat   certification RH133   RH133   RH133

NO.2 By default, which of the following commands configures the current run level?
A. chkconfig
B. pstree
C. service
D. ntsysv
Answer: D

RedHat   certification RH133   RH133   RH133

NO.3 You want to verify the PGP signature of all headers and signatures associated with an RPM package.
Which of the following commands will you use to accomplish the task?
Each correct answer represents a complete solution. Choose all that apply.
A. rpm -e
B. rpm -K
C. rpm --checksig
D. rpm -V
Answer: B,C,D

certification RedHat   RH133   RH133   RH133 examen   RH133   RH133

NO.4 Which of the following commands can be used to check the errors of the ext2 and ext3
filesystems?
Each correct answer represents a complete solution. Choose two.
A. fsck --ext2
B. fsck.ext3
C. fsck --ext3
D. e2fsck
Answer: B,D

RedHat examen   RH133 examen   RH133 examen   RH133

NO.5 Fill in the blank with the appropriate command.
The ________ command recursively removes files, which have not been accessed for a period oftime.
A. tmpwatch
Answer: A

RedHat   RH133 examen   RH133

NO.6 You work as a Network Administrator for Rick Inc. The company has a Linux-based network. You are
configuring a Linux server. Which of the following bootloaders does not require to be rewritten after the
configuration of the kernel has been changed?
A. GRUB
B. BOOTP
C. LILO
D. ELILO
Answer: A

RedHat examen   certification RH133   certification RH133   RH133 examen

NO.7 You want to make Rick an owner of the files TRADE1.TXT and TRDREPORT.TXT. Which of the
following commands will you use to accomplish this?
A. chown rick TRADE1.TXT TRDREPORT.TXT
B. chgrp rick TRADE1.TXT + TRDREPORT.TXT
C. chown rick TRADE1.TXT + TRDREPORT.TXT
D. chgrp rick TRADE1.TXT TRDREPORT.TXT
Answer: A

RedHat   RH133   RH133   RH133 examen   RH133   RH133

NO.8 Which of the following fsck commands will you use to check all filesystems listed in /etc/fstab?
A. fsck -P
B. fsck -f
C. fsck -A
D. fsck -y
Answer: C

RedHat examen   RH133   RH133 examen   RH133   RH133   RH133

NO.9 Which of the following commands can be used to modify kernel parameters at runtime?
A. sync
B. sysctl
C. mkinitrd
D. lsdev
Answer: B

certification RedHat   RH133 examen   RH133   RH133   certification RH133   RH133

NO.10 You work as a Network Administrator for McNeil Inc. The company has a Linux-based network.
You are a root user on the Linux system. You have to create a user named Trinity and deny interactive
login. Which of the following should you use to accomplish the task?
Each correct answer represents a part of the solution. Choose all that apply.
A. vi /etc/passwd
B. vi /etc/shadow
C. useradd Trinity
D. passwd Trinity
E. Trinity:x:505:505::/home/Trinity:/sbin/nonlogin
Answer: A,B,C,D,E

RedHat   RH133   RH133   certification RH133

NO.11 You want only the root access in a Linux computer for maintenance purposes. Which of the following
runlevels will you use to boot the computer?
A. 2
B. 0
C. 1
D. 3
Answer: C

RedHat   RH133 examen   RH133   RH133

NO.12 After creating the swap area, which of the following commands will you need to run to start using it?
A. mkswap
B. mkfs
C. swapon
D. swapoff
Answer: C

RedHat   certification RH133   certification RH133   RH133   RH133 examen

NO.13 After enabling shadowed passwords in a Linux server, where does Linux keep the passwords?
A. /usr/shadow
B. /etc/passwd
C. /usr/passwd
D. /etc/shadow
Answer: D

RedHat   RH133   RH133   RH133 examen

NO.14 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. John is working as a root user on the Linux operating system. He wants to run the cc process at
runlevel three. If the order of execution of cc command is 43, which of the following commands will John
use to accomplish his task?
A. ln -s /etc/init.d/cc /etc/rc.d/rc3.d/K43cc
B. ln -s /etc/rc.d/init.d/cc /etc/rc.d/rc3.d/K43cc
C. ln -s /etc/rc.d/cc /etc/rc.d/rc3.d/s43cc
D. ln -s /etc/rc.d/init.d/cc /etc/rc.d/rc3.d/S43cc
Answer: D

RedHat   certification RH133   certification RH133

NO.15 You work as a System Administrator for McNeil Inc. The company has a Linux based network.
You are a root user on Red Hat operating system. You have upgraded the amount of RAM in your system
from 256 MB to 512 MB, but there is only 512 MB of swap space. Therefore, you want to add more swap
space to /dev/hdb2 hard drive to run the applications that require a large amount of memory. Which of the
following commands should you run to accomplish this task? Each correct answer represents a complete
solution. Choose all that apply.
A. mkswap /dev/hdb2
B. swapon /dev/hdb2
C. mount
D. parted
Answer: A,B,D

RedHat examen   certification RH133   RH133   certification RH133

NO.16 Which of the following commands displays a module name or filename and associated
information, such as the authors name, license, description, module version, dependencies, parameters,
etc?
A. modprobe
B. lsmod
C. modprob
D. modinfo
Answer: D

certification RedHat   RH133 examen   RH133   RH133

NO.17 Which of the following commands can be used to compress a file?
Each correct answer represents a complete solution. Choose all that apply.
A. gzip
B. compress
C. tar
D. zip
Answer: A,B,D

RedHat   RH133   RH133

NO.18 Which of the following commands is used to create a user account for a new user?
A. USERMOD
B. MOUNT
C. USERADD
D. CRUSER
Answer: C

certification RedHat   RH133   certification RH133   RH133

NO.19 What is the minimum RAM requirement for installing Red Hat in GUI mode?
A. 1GB
B. 512 MB
C. 128MB
D. 64MB
Answer: C

RedHat   certification RH133   certification RH133   certification RH133   RH133   RH133 examen

NO.20 Which of the following commands will you run to list all files that have been modified within the last 60
minutes?
A. find /etc -name *.txt
B. find start -dir -min -60
C. find start -dir -cmin -60
D. find start -cmin -60
Answer: C

RedHat   RH133   RH133 examen

NO.21 You work as a Network Administrator for Tech Perfect Inc. The company has a Linux-based network.
You are configuring a server that will be used as a file server. You want to install an RPM package, named
FILELOCATOR, on the server. You want to check whether the package is already installed. Which of the
following commands will you use?
A. grep FILELOCATOR
B. find -q rpm |grep FILELOCATOR
C. rpm -qa | grep FILELOCATOR
D. find FILELOCATOR
Answer: C

RedHat   RH133   certification RH133

NO.22 You work as a Linux Technician for Tech Perfect Inc. The company has a Linux-based network.
You have configured a database server in the network. Users complain that the server has
become remarkably slow. However, the previous day, the server was performing well. You know that
some of the processes may be the cause of the issue. You run the PS command on the server. In the
result set, which information will you look at that suggests the problematic process?
A. A high load average
B. A high process ID
C. A low load average
D. A low CPU time
E. A high CPU time
Answer: E

RedHat   RH133   RH133   RH133   certification RH133

NO.23 Which of following options will you use to force mtr to display numeric IP numbers and not try to
resolve the host names?
A. -t
B. -n
C. -l
D. -p
Answer: B

RedHat   RH133 examen   certification RH133   certification RH133   RH133

NO.24 Which of the following statements are true about kernel modules?
Each correct answer represents a complete solution. Choose all that apply.
A. Kernel modules do not support executable loaders.
B. The kernel module contains extra kernel codes that may be loaded after the loading of the basekernel.
Only a minimal resident kernel is loaded into memory at boot time.
C. Kernel modules do not support the device drivers, network drivers, and file system drivers.
D. Whenever a user requests a feature that is not present in the resident kernel, a kernel moduleis
dynamically loaded into memory.
Answer: B,D

RedHat   RH133   RH133   certification RH133

NO.25 You work as a Network Administrator for Secure Web Inc. The company has a Linux-based network.
The network has a mixed set of client operating systems. You want to format a new hard disk drive. The
drive will have only one partition. Both the Linux and Windows operating systems will access the partition.
Which of the following file systems will you use?
A. VFAT
B. XFS
C. REISER
D. EXT3
Answer: A

certification RedHat   RH133   certification RH133   RH133   RH133 examen

NO.26 When installing RHEL in the graphical interface, which of the following switches can be used to specify
a resolution?
A. lowers
B. vnc
C. resolution
D. skipddc
Answer: C

RedHat   RH133 examen   RH133 examen

NO.27 You work as a Software Engineer for McNiel Inc. The company has a Linux-based network. The
company has 150 Engineers. The root user has configured quota limits for each user. You want to view
quota limits for your system. Which of the following commands will you use to accomplish this task?
A. repquota -a
B. quota -v
C. quotacheck
D. edquota
Answer: B

RedHat   RH133   certification RH133   certification RH133   certification RH133   certification RH133

NO.28 You work as a Network Administrator for Net World International. The company has a Linux-based
network. You want to upgrade an RPM package and get the status during the upgrade. Which of the
following commands will you use to accomplish the task?
A. rpm -ivh
B. rpm -evh
C. rpm -qvh
D. rpm -Uvh
Answer: D

RedHat   RH133   RH133   RH133 examen   RH133 examen

NO.29 CORRECT TEXT
Drag and drop the appropriate command in front of its respective function.
Answer: A

RedHat   RH133   RH133   RH133

NO.30 You want to temporarily change your primary group to another group of which you are a member. In
this process, a new shell will be created, and when you exit the shell, your previous group will be
reinstated. Which of the following commands will you use to accomplish this task?
A. chgrp
B. newgrp
C. chmod
D. chown
Answer: B

RedHat   RH133 examen   certification RH133   certification RH133   certification RH133

Pass4Test est un seul site de provider le guide d'étude RedHat RH133 de qualité. Peut-être que vous voyiez aussi les Q&A RedHat RH133 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Pass4Test offre une formation sur RedHat RH202 matériaux examen

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification RedHat RH202 via son guide d'étude. Est-ce que vous vous souciez de test Certification RedHat RH202? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

La population de la Certification RedHat RH202 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

Votre vie changera beaucoup après d'obtenir le Certificat de RedHat RH202. Tout va améliorer, la vie, le boulot, etc. Après tout, RedHat RH202 est un test très important dans la série de test Certification RedHat. Mais c'est pas facile à réussir le test RedHat RH202.

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test RedHat RH202. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification RedHat RH202. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test RedHat RH202. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Code d'Examen: RH202
Nom d'Examen: RedHat (Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs))
Questions et réponses: 171 Q&As

But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test RedHat RH202 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test RedHat RH202, votre argent sera tout rendu.

Le test RedHat RH202 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

RH202 Démo gratuit à télécharger: http://www.pass4test.fr/RH202.html

NO.1 Verify by mounting on current Sessions also:

RedHat examen   certification RH202   certification RH202

NO.2 Write:

RedHat examen   certification RH202   certification RH202

NO.3 Type the Size: +100M ¨¤ You can Specify either Last cylinder of Size her.

RedHat examen   certification RH202   certification RH202

NO.4 CORRECT TEXT
Set the Hostname station?.example.com where ? is your Host IP Address.
Answer and Explanation:
1. hostname station?.example.com ¨¤ This will set the host name oly for current session. To set
hostname permanently.
2. vi /etc/sysconfig/network
HOSTNAME=station?.example.com
3. service network restart

RedHat examen   certification RH202   certification RH202

NO.5 Or

RedHat examen   certification RH202   certification RH202

NO.6 CORRECT TEXT
Change the root Password to redtophat
Answer and Explanation:Boot the system in Single user modeUse the passwd command

RedHat examen   certification RH202   certification RH202

NO.7 Press w to write on partitions table.

RedHat examen   certification RH202   certification RH202

NO.8 /dev/hda? /mnt/neo ext3 defaults 1 2

RedHat examen   certification RH202   certification RH202

NO.9 CORRECT TEXT
The System you are using is for NFS (Network File Services). Some important data are shared from your
system. Make automatically start the nfs and portmap services at boot time.
Answer and Explanation:
We can control the services for current session and for next boot time also. For current Session,we use
service servicename start or restart or stop or status. For automatically on next reboot time:
1. chkconfig servicename on or off
eg: chkconfig nfs on
chkconfig portmap on
or ntsysv
Select the nfs and portmap services.
2. Reboot the system and identify whether services are running or not.

RedHat examen   certification RH202   certification RH202

NO.10 Use mkfs -t ext3 /dev/hda? Where ? is your partition number

RedHat examen   certification RH202   certification RH202

NO.11 Either Reboot or use partprobe command.

RedHat examen   certification RH202   certification RH202

NO.12 vi /etc/fstab

RedHat examen   certification RH202   certification RH202

NO.13 mount /dev/hda? /mnt/neo
4.CORRECT TEXT
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP
Forwarding.
Answer and Explanation:
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf
net.ipv4.ip_forward=1
/proc is the virtual filesystem, containing the information about the running kernel. To change the
parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will
take the value from /etc/sysctl.conf.
5.CORRECT TEXT
Some users home directory is shared from your system. Using showmount -e localhost command, the
shared directory is not shown. Make access the shared users home directory.
Answer and Explanation:
1. Verify the File whether Shared or not ? : cat /etc/exports
2. Start the nfs service: service nfs start
3. Start the portmap service: service portmap start
4. Make automatically start the nfs service on next reboot: chkconfig nfs on
5. Make automatically start the portmap service on next reboot: chkconfig portmap on
6. Verify either sharing or not: showmount -e localhost
7. Check that default firewall is running on system ? if running flush the iptables using iptables -F and stop
the iptables service.
6.CORRECT TEXT
neo user tried by:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
files created successfully. Again neo tried to create file having 70K using following command:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
But he is unable to create the file. Make the user can create the file less then 70K.
Answer and Explanation:
Very Tricky question from redhat. Actually question is giving scenario to you to implement quota to neo
user. You should apply the quota to neo user on /home that neo user shouldn't occupied space more than
70K.
1. vi /etc/fstab
LABEL=/home /home ext3 defaults,usrquota 0 0 ¨¤ To enale the quota on filesystem you should mount
the filesystem with usrquota for user quota and grpquota for group quota.
2. touch /home/aquota.user ¨¤Creating blank quota database file.
3. mount -o remount /home ¨¤ Remounting the /home with update
mount options. You can verify that
/home is mounted with usrquota options or not using mount command.
4. quotacheck -u /home ¨¤ Initialization the quota on /home
5. edquota -u neo /home ¨¤ Quota Policy editor
See the snapshot
1 Disk quotas for user neo (uid 500):
2.Filesystem blocks soft hard inodes soft hard
4 /dev/mapper/vo-myvol 2 30 70 1 0 0
Can you set the hard limit 70 and soft limit as you think like 30.
Verify using the repquota /home command.
7.CORRECT TEXT
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size
of that Logical Volume is 124MB. Make successfully that the size of Logical Volume 245MB without losing
any data. The size of logical volume 240MB to 255MB will be acceptable.
Answer and Explanation:
1. First check the size of Logical Volume: lvdisplay /dev/vo/myvol
2. Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol
3. Make Available the size on online: resize2fs /dev/vo/myvol
4. Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
5. Verify that the size comes in online or not: df -h
We can extend the size of logical Volume using the lvextend command. As well as to decrease the
size of Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical
Volume without unmount as well as we can bring the actual size of Logical Volume on online using
ext2online command.
8.CORRECT TEXT
Quota is implemented on /data but not working properly. Find out the
Problem and implement the quota to user1 to have a soft limit 60 inodes
(files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems. Without quotas, one or more users
can upload files on an FTP server to the point of filling a filesystem. Once the affected partition is full,
other users are effectively denied upload access to
the disk. This is also a reason to mount different filesystem directories on different partitions. For example,
if you only had partitions for your root (/) directory and swap space, someone uploading to your computer
could fill up all of the space in your root directory (/). Without at least a little free space in the root directory
(/), your system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobyte-sized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system. Older versions
of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab
/dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
3. touch /data/aquota.user
4. quotacheck -ufm /data
5. quotaon -u /data
6. edquota -u user1 /data
and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
9 CORRECT TEXT
One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume
500M without losing any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equal-sized chunks known as
Physical Extents (PE). As there are several other concepts associated with the LVM system, let's start
with some basic definitions:
* Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume
is a standard primary or logical partition. It can also be a RAID array.
* Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized
PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
* Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
* Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home
and /var on an LV.
* Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. resize2fs /dev/vg0/lv1 ¨¤ to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
10 CORRECT TEXT
Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤To create new partition.
2. Type n ¨¤For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ¨¤You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
Ormke2fs -j /dev/hda? ¨¤ To create ext3 filesystem
10. vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
11. Verify by mounting on current Sessions also:
mount /dev/hda? /data
11.CORRECT TEXT
You are new System Administrator and from now you are going to handle the system and yourmain task is
Network monitoring, Backup and Restore. But you don't know the root password.
Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab:
Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode.
You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode
ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
12.CORRECT TEXT
There are more then 400 Computers in your Office. You are appointed as a System Administrator.
But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you
enable IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf ¨¤when System Reboot on next tme, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
13.CORRECT TEXT
You Completely Install the Redhat Enterprise Linux 5 on your System. While start the system, it's giving
error to load X window System. How will you fix that problem and make boot successfully run X Window
System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp ¨¤ /tmp is full remove the unnecessary file
2. quota username ¨¤if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3.¨¤you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display ¨¤ It will display a dialog o configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab
id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
14.CORRECT TEXT
There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in
192.168.0.0/24 Network. One RHEL 5 Installed System is going to use as a Router. All required
configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP
Address are assigned on that Server. How will make successfully ping to 192.168.1.0/24
Network's Host?
Answer and Explanation:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
15.CORRECT TEXT
Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤To create new partition.Type n ¨¤ For New partitionIt will ask foLogical or
Primary Partitions. Press l for logical.It will ask for the Starting Cylinder: Use the Default by
pressing Enter Key.Type the Size: +100M ¨¤ You can Speciy either Last cylinder of Size
here.Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that
means Linux Native.Type t to change the System ID of partition.Type Partition
NumberType 82 that means Linux Swap.Press w to write on partitions table.Either Reboot or use
partprobe command.mkswap /dev/hda?¨¤ To create Swap File system on partition.swapon
/dev/hda?¨¤ To enable the Swap space from partition.free-m ¨¤ Verify Either Swap is enabled or
not.vi /etc/fstab
/dev/hda? swap swap defaults 0 0Reboot the System and verify that swap is automatically
enabled or not.
16.CORRECT TEXT
You are a System administrator. Using Log files very easy to monitor the system. Now there are 50
servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from all servers
into on LOG Server. How will you configure the LOG Server to accept logs from remote host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log from other host
configure:vi /etc/sysconfig/syslog
SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
service syslog restart
17.CORRECT TEXT
You are giving the debug RHCT exam. The examiner told you that the password of root is redhat.
When you tried to login displays the error message and redisplayed the login screen. You
changed the root password, again unable to login as a root. How will you make Successfully Login as a
root.
Answer and Explanation:
When root unable to login into the system think:
1. Is password correct?
2. Is account expired?
3. Is terminal Blocked?
Do these Steps:
3. Boot the System on Single user mode.
4. Change the password
5. Check the account expire date by using chage -l root command.
If account is expired, set net expire date: chage -E "NEVER" root
4. Check the file /etc/securetty ¨¤ Which file blocked to root login from certain terminal.
5. If terminal is deleted or commented write new or uncomment.
6. Reboot the system and login as a root.

RedHat examen   certification RH202   certification RH202

NO.14 CORRECT TEXT
Dig Server1.example.com, Resolve to successfully through DNS Where DNS server is
172.24.254.254
Answer and Explanation:
#vi /etc/resolv.conf
nameserver 172.24.254.254
# dig server1.example.com
#host server1.example.com
DNS is the Domain Name System, which maintains a database that can help your computer
translate domain names such as www.redhat.com to IP addresses such as 216.148.218.197. As
no individual DNS server is large enough to keep a database for the entire Internet, they can refer
requests to other DNS servers.
DNS is based on the named daemon, which is built on the BIND (Berkeley Internet Name Domain)
package developed through the Internet Software Consortium
Users wants to access by name so DNS will interpret the name into ip address. You need to
specify the Address if DNS server in each and every client machine. In Redhat Enterprise Linux,
you need to specify the DNS server into /etc/resolv.conf file.
After Specifying the DNS server address, you can verify using host, dig and nslookup commands.

RedHat examen   certification RH202   certification RH202

NO.15 Press P to verify the partitions lists and remember the partitions name.

RedHat examen   certification RH202   certification RH202

NO.16 It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

RedHat examen   certification RH202   certification RH202

NO.17 CORRECT TEXT
You are giving RHCT Exam and in your Exam paper there is a question written, make successfully ping to
192.168.0.254.
Answer and Explanation:
In Network problem thinks to check:
1. IP Configuration: use ifconfig command either IP is assigned to interface or not?
2. Default Gateway is set or not?
3. Hostname is set or not?
4. Routing problem is there?
5. Device Driver Module is loaded or not?
6. Device is activated or not?
Check In this way:
1. use ifconfig command and identify which IP is assigned or not.
2. cat /etc/sysconfig/network ¨¤What, What is written here. Actually here are these parameters
NETWORKING=yes or no
GATEWAY=x.x.x.x
HOSTNAME=?
NISDOMAIN=?
-Correct the file
3. Use vi /etc/sysconfig/network-scirpts/ifcfg-eth0 and check the proper options
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=x.x.x.x
NETMAKS=x.x.x.x
GATEWAY=x.x.x.x
4. Use service network restart or start command

RedHat examen   certification RH202   certification RH202

NO.18 mkdir /mnt/neo

RedHat examen   certification RH202   certification RH202

NO.19 mke2fs -j /dev/hda? ¨¤ To create ext3 filesystem.

RedHat examen   certification RH202   certification RH202

NO.20 CORRECT TEXT
Create the partition having 100MB size and mount it on /mnt/neo
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤ To create new partition.
2. Type n ¨¤ For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.

RedHat examen   certification RH202   certification RH202

L'importance de la position de Certificat RedHat RH202 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen RedHat RH202 par votre première fois.

Le plus récent matériel de formation examen RedHat EX200 de certification

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test RedHat EX200, la voie à la réussite de votre professionnel sera ouverte pour vous.

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Si vous traviallez dur encore pour préparer le test de RedHat EX200 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test RedHat EX200.

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de RedHat EX200 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Code d'Examen: EX200
Nom d'Examen: RedHat (Red Hat Certified System Administrator - RHCSA)
Questions et réponses: 24 Q&As

EX200 Démo gratuit à télécharger: http://www.pass4test.fr/EX200.html

NO.1 Add 3 users: harry, natasha, tom.
The requirements: The Additional group of the two users: harry, Natasha is the admin group. The user:
tom's login shell should be non-interactive.
Answer:
# useradd -G admin harry
# useradd -G admin natasha
# useradd -s /sbin/nologin tom
# id harry;id Natasha (Show additional group)
# cat /etc/passwd
(Show the login shell)
OR
# system-config-users

RedHat   EX200   EX200   certification EX200   certification EX200

NO.2 Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1
Answer:
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40
GATEWAY=172.24.40.1
DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim
/etc/sysconfig/network
(Configure Host Name)

RedHat   EX200   EX200   certification EX200   certification EX200

Le test RedHat EX200 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test RedHat EX200 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

RedHat meilleur examen RH033, questions et réponses

Vous pouvez tout d'abord télécharger le démo RedHat RH033 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification RedHat RH033. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test RedHat RH033. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test RedHat RH033 à la première fois.

Code d'Examen: RH033
Nom d'Examen: RedHat (Red Hat Linux Essentials)
Questions et réponses: 153 Q&As

La Q&A RedHat RH033 de Pass4Test est liée bien avec le test réel de RedHat RH033. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test RedHat RH033 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Passer le test RedHat RH033, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification RedHat RH033. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification RedHat RH033.

RH033 Démo gratuit à télécharger: http://www.pass4test.fr/RH033.html

NO.1 You work as a Network Administrator for McNeil Inc. The company has a Linux-based network. David, a
Sales Manager, wants to know the name of the shell that he is currently using. Which of the following
commands will he use to accomplish the task?
A. ECHO $shell
B. RM $shell
C. MV $shell
D. LS $shell
Answer: A

RedHat examen   certification RH033   RH033   RH033   RH033   certification RH033

NO.2 Fill in the blank with the required permission to complete the statement below. In order to make a script
executable in a Linux computer, you must assign the___________ permission to the script file.
A. execute
Answer: A

RedHat   RH033   RH033   RH033

NO.3 Which of the following commands will you use to list all local and remote printers attached to your
computer?
A. lpq
B. lpstat -d
C. lpstat -t
D. lpr
Answer: C

certification RedHat   certification RH033   certification RH033   RH033   RH033 examen   RH033

NO.4 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. John is working as a root user on the Linux operating system. He wants to break a dat a.txt file,
200MB in size, into two files in which the size of the first file named data.txt.aa should be150MB and that
of the second file named data.txt.ab should be 50MB. To accomplish his task and to further delete the
data.txt file, he enters the following command: split --verbose -b 150m data.txt data.txt. ; rm -vf data.txt
Which of the following commands can John use to join the splitted files into a new data.txt file?
A. vi data.txt.*
B. less data.txt.* > data.txt
C. cat data.txt.* > data.txt
D. vi data.txt.* > data.txt
Answer: C

certification RedHat   certification RH033   certification RH033

NO.5 Which of the following commands copies files between hosts on a network and uses the same
authentication as ssh, and will ask for passwords or passphrases if they are needed for authentication?
A. scp
B. rcp
C. cp
D. mv
Answer: A

RedHat examen   RH033   certification RH033   RH033   RH033

NO.6 You work as the Network technician for McNeil Inc. The company has a Linux-based Network. You are
working on the Red Hat operating system. You want to remove some write protected files and directories.
Which of the following commands should you use to accomplish this task?
A. rm -rf
B. rm -f
C. rmdir
D. rm
Answer: A

RedHat examen   RH033   RH033 examen

NO.7 You work as the Network Administrator for Perfect solutions Inc. The company has a Linux-based
Network. You are working as a root user. You want to know what the day will be on 20 July 2010. Which of
the following commands should you use to accomplish this task?
A. cal
B. cal 20 July
C. cal 7 2010
D. date
Answer: C

RedHat examen   certification RH033   RH033

NO.8 You want to temporarily change your primary group to another group of which you are a member. In this
process, a new shell will be created, and when you exit the shell, your previous group will be reinstated.
Which of the following commands will you use to accomplish this task?
A. chmod
B. newgrp
C. chgrp
D. chown
Answer: B

certification RedHat   certification RH033   RH033   RH033 examen

NO.9 Which of the following key-combinations is used to redo a change undone by a u command in vim?
A. Ctrl-w, Arrow
B. Ctrl-w, s
C. Ctrl-r
D. Ctrl-w, v
Answer: C

RedHat   RH033 examen   RH033

NO.10 Fill in the blank with the appropriate tool. __________ is a public domain collection of tools to allow
Unix systems to manipulate MS-DOS files: read, write, and move around files on an MSDOS file system.
A. mtools
Answer: A

certification RedHat   certification RH033   RH033 examen

NO.11 Mark is a newly appointed Network Technician for McNeil Inc. The company has a Linux-based
network. He is working on the Red Hat operating system. He wants to sort a file named marketing.txt in
the reverse alphabetical order. Which of the following commands should Mark use to accomplish this
task?
A. sort -u marketing.txt
B. sort marketing.txt
C. sort -n marketing.txt
D. sort -r marketing.txt
Answer: D

certification RedHat   RH033   RH033 examen

NO.12 Which of the following commands is used to securely copy files from one host to another over the
network?
A. ls
B. cat
C. mutt
D. scp
Answer: D

RedHat   RH033 examen   RH033

NO.13 Which of the following text editing tools can be used to edit text files without having to open them?
A. less
B. sed
C. vi
D. more
Answer: B

RedHat   RH033   certification RH033   certification RH033   RH033

NO.14 You work as a Network Administrator for McNeil Inc. The company has a Linux-based network. A printer
is configured on the network. You want to remove a file from a print queue. Which of the following
commands will you use to accomplish this?
A. LPR
B. LPQDEL
C. LPRM
D. LPQ
Answer: C

RedHat   RH033   RH033 examen   certification RH033

NO.15 Which ftp client command allows you to upload multiple files simultaneously using the "*" wildcard?
A. mput
B. mget
C. put
D. get
Answer: A

RedHat   certification RH033   RH033   RH033 examen

NO.16 Which of the following commands will you run to do case-sensitive search for files named foobar.png?
A. locate -name foobar.png
B. find -iname foobar.png
C. grep-name foobar.png
D. find -name foobar.png
Answer: D

certification RedHat   certification RH033   RH033 examen   RH033   RH033 examen

NO.17 You are a newly appointed Red Hat Technician for company Inc. The company has a Linux-based
network. You want to install a package named httpd on your Linux system. Before installing the package,
you want to get the list of those packages that httpd depends on. Which of the following commands will
you use to accomplish the task?
A. rpm deplist httpd
B. yum deplist httpd
C. yum list httpd
D. rpm -qR httpd
Answer: B

RedHat   RH033 examen   RH033   certification RH033   RH033

NO.18 Which of the following options is used with aspell to specify the location of the main word list?
A. d,--master=string
B. -p,--personal=file
C. --jargon=string
D. --dict-dir=dir
Answer: D

RedHat   certification RH033   RH033   RH033 examen   RH033   certification RH033

NO.19 Which of the following commands is used to access Windows resources from Linux workstation?
A. rsync
B. mutt
C. scp
D. smbclient
Answer: D

certification RedHat   RH033 examen   certification RH033

NO.20 You work as the Network Administrator for McNeil Inc. The company has a Linux-based network.You
are working as a root user on Red Hat operating system. You are currently running a programnamed
My_program. You are getting some error messages while executing the program. Youwant to redirect
these error messages to a file named file2 rather than being displayed on the
screen.Which of the following tools should you use to accomplish the task?
A. My_program >> file2
B. My_program 2> file2
C. My_program 2>> file2
D. My_program > file2
Answer: B

RedHat   certification RH033   certification RH033

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification RedHat RH033. Il n'y a pas de soucis à réussir le test avec une haute note.