Le plus récent matériel de formation HP HP0-M33 HP0-J65 HP0-Y37

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification HP HP0-M33.

C'est pas facile à passer le test Certification HP HP0-J65, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test HP HP0-J65 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test HP HP0-J65, vous allez passer le test HP HP0-J65 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test HP HP0-Y37 et passer le test à la première fois.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification HP HP0-J65. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de HP0-J65, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Code d'Examen: HP0-M33
Nom d'Examen: HP (HP Operations Orchestration 9.x Software)
Questions et réponses: 70 Q&As

Code d'Examen: HP0-J65
Nom d'Examen: HP (Designing HP SAN Networking Solutions)
Questions et réponses: 351 Q&As

Code d'Examen: HP0-Y37
Nom d'Examen: HP (Migrating &Troubleshooting Enterprise Networks)
Questions et réponses: 104 Q&As

Pass4Test peut offrir nombreux de documentations aux candidats de test HP HP0-J65, et aider les candidats à réussir le test. Les marétiaux visés au test HP HP0-J65 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test HP HP0-J65 100%.

HP0-J65 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J65.html

NO.1 You are preparing for a homogeneous fabric merge and notice the customer set the same
domain ID for all fabrics. What will happen if this is not corrected?
A. Enabled zone configurations are immediately disabled.
B. Domain IDs remain unchanged and the fabrics become segmented.
C. Domain IDs are automatically renumbered and the fabrics merge, but port zoning is affected.
D. Domain IDs are automatically renumbered and the fabrics merge without any side effect.
Answer: B

HP examen   HP0-J65 examen   certification HP0-J65
11. Which method should you use to quickly and easily document a new customer SAN
configuration?
A. Follow all cabling from port to port, write down source and target of the cables, label the cables,
and recordthe labels.
B. Collect the customer's configuration data using SANVisibility, upload the data and verify the
report as soonas you get the documents.
C. Install HP SIM and HP Storage Essentials SRM in 60-day trial mode on a new Windows
CentralManagement Server and collect the site information to evaluate the result with Report
Designer
D. UseFinisar Fibre Channel Sniffer to determine source, destination, quality and performance of
the FibreChannel configuration.
Answer: B

certification HP   HP0-J65   HP0-J65
12. Which tasks are performed in the background by a storage system if write-back caching is
enabled? (Select two.)
A. Rotate
B. Cache data
C. CPU processing
D. Acknowledge to Write
E. Seek
Answer: A,E

HP   certification HP0-J65   HP0-J65   HP0-J65 examen   HP0-J65
13. Which HP offering most effectively provides customers with SAN management knowledge
and skills?
A. free downloadable documentation
B. web-based and instructor-led training
C. on-site technical HP support engineers
D. proactive and reactive support
Answer: B

HP examen   HP0-J65 examen   HP0-J65 examen   certification HP0-J65   HP0-J65 examen   certification HP0-J65
14. Which activity should be done last during the fulfillment of an HP Installation and Startup
Service?
A. infrastructure functionality test
B. customer orientation session
C. documentation preparation
D. Call Home Software (ISEE) installation
Answer: B

HP examen   HP0-J65 examen   HP0-J65
15. What are the best SAN topologies for a one-to-one local data locality? (Select two.)
A. meshed fabric
B. ring fabric
C. fat tree backbone fabric
D. cascaded fabric
E. skinny tree backbone fabric
Answer: B,D

HP examen   HP0-J65   HP0-J65 examen   certification HP0-J65

NO.2 You are implementing a SAN infrastructure including an HP StorageWorks EVA4400 at Your
customer site. The customer is interested in using three-site cascaded replication functionality.
What should you recommend to accomplish this? (Select two)
A. HPStorageWorks FlexCopy
B. HP Continuous Access EVA
C. additional disks in the EVA
D. HP Virtual Replicator
E. HP Business Copy EVA
Answer: B,E

HP examen   HP0-J65 examen   certification HP0-J65

NO.3 A single Fibre Channel router is implemented in an existing SAN. What can be accomplished?
A. fabric management service
B. fabric interconnection without merge
C. SAN availability improvement
D. SAN extension across long distances
Answer: B

certification HP   certification HP0-J65   certification HP0-J65   HP0-J65 examen

NO.4 Which HP tool provides the ability to create a Microsoft Visio diagram of a SAN topology for
your customer documentation?
A. SAN Health
B. SAN Designer
C. SAN Visibility
D. SAN Navigator
Answer: C

HP   HP0-J65 examen   HP0-J65 examen   HP0-J65   certification HP0-J65

NO.5 You are preparing an installation plan for implementing a new SAN design and want to ensure
all customer needs are included. Which data collection method requires that you create a process
list and review all relevant stakeholders?
A. Card Arrangement
B. Information Extraction
C. Brainstorming
D. Process Mapping
Answer: B

HP examen   certification HP0-J65   certification HP0-J65   HP0-J65 examen

NO.6 Which information should be included in the topology map documentation of a SAN design
provided to your support organization? (Select two.)
A. serial numbers of connected servers
B. SAN switch zoning configurations
C. storage controller operating mode parameters
D. IP addresses of the connected servers
E. World Wide Names of all nodes and devices
Answer: B,E

certification HP   certification HP0-J65   certification HP0-J65   HP0-J65 examen   certification HP0-J65

NO.7 Which Fibre Channel timing variables must match in an interoperable fabric?
A. Timing variables do not need to match.
B. R_A_TOV, E_D_TOV and B_B_TOV
C. R_A_TOV and E_D_TOV
D. R_A_TOV and B_B_TOV
Answer: C

HP examen   HP0-J65   HP0-J65 examen   HP0-J65 examen   HP0-J65   certification HP0-J65

NO.8 To install additional switches, you must determine the ideal ISL ratio. Which ISL ratio range is
recommended for less I/O intensive application requirements (less than 70 MB/s at 2 Gb/s, less than
140 MB/s at 4 Gb/s, less than 280 MB/s at 8 Gb/s)?
A. 3:1 to 1:1
B. 1:1 to 3:1
C. 15:1 to 7:1
D. 7:1 to 15:1
Answer: D

certification HP   HP0-J65   HP0-J65 examen   HP0-J65
Explanation:
Recommended core-edge fabric ISL ratios I/O workload Recommended ratios Higher I/O data
intensive application requirements (greater than 70 MB/s at 1:1 to 3:1 2 Gb /s, greater than140
MB/s at 4 Gb /s, greater than 280 MB/s at 8 Gb /s) Lower I/O data intensive application
requirements (<70MB/s at 2 Gb / s, <140 7:1 to 15:1)

Certification HP de téléchargement gratuit pratique d'examen HP0-Y37, questions et réponses

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification HP HP0-Y37. Il n'y a pas de soucis à réussir le test avec une haute note.

En quelques années, le test de certification de HP HP0-Y37 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de HP HP0-Y37? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification HP0-Y37. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification HP0-Y37, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

La partie plus nouvelle de test Certification HP HP0-Y37 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel HP HP0-Y37. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

Code d'Examen: HP0-Y37
Nom d'Examen: HP (Migrating &Troubleshooting Enterprise Networks)
Questions et réponses: 104 Q&As

Si vous faites toujours la lutte contre le test HP HP0-Y37, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de HP HP0-Y37. Si vous avez déjà décidé à s'améliorer via HP HP0-Y37, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

HP0-Y37 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y37.html

NO.1 A provider of MPLS services configures MPLS Layer-3 VPN services for three customers. Each
customer has three branch offices that will be interconnected by MPLS Layer-3 VPNs. One customer is
advertising their IP prefixes between sites using BGP. This customer establishes a backup link directly
connecting Site-1 to Site-2. Which BGP attribute can the provider use to prevent routing update loops in
the MPLS network?
A. COO
B. FOO
C. KOO
D. SOO
E. VOO
Answer: D

HP   HP0-Y37   HP0-Y37   certification HP0-Y37   HP0-Y37 examen

NO.2 Click the Exhibit button.
Which statements are true about the BGP configuration of this HP A-Series router? (Select two.)
A. The router announces IP prefix 200.1.0.0/23 to its BGP neighbor if the network is in routing table.
B. The as-path ACL define networks that were last forwarded by AS 200.
C. The configuration includes a filter out to the neighbor 222.222.10.1.
D. The BGP router is in AS 200 and its BGP neighbor is in AS 100.
E. The BGP router will establish a BFD connection with its BGP neighbor 222.222.10.1 if the neighbor is
also configured for BFD
Answer: A,E

certification HP   HP0-Y37   certification HP0-Y37

NO.3 Click the Exhibit button and view the three exhibits.
When interface Serial 4 of Router 2 fails, traffic from Router 1 destined for network 156.152.0.0/16 leaves
AS 65001 via the Serial 3 interface of Router 1. The administrator prefers that this traffic leaves AS 65001
through interface Serial 5 of Router 2. Which configuration change will achieve the desired results?
A. Router-2#
bgp 100
peer 16.0.0.1 next-hop-local
B. Router-2#
route-policy Policy permit node 10
apply local-preference 500
bgp 100
peer 156.152.5.1 route-policy Policy
C. Router-2#
route-policy Policy permit node 10
apply preferred-value 500
bgp 100
peer 156.152.5.1 route-policy Policy
D. Router-1#
route-policy Policy permit node 10
apply preferred-value 500
bgp 100
peer 16.0.0.2 route-policy Policy
Answer: A

HP examen   HP0-Y37   HP0-Y37   certification HP0-Y37   HP0-Y37 examen

NO.4 What is a characteristic of load balancing in RRPP?
A. multiple RRPP rings within a domain
B. overlapping RRPP rings
C. multiple RRPP domains with different root priorities
D. It is not possible to load balance with RRPP.
E. multiple RRPP domains sharing the same ring
Answer: E

HP   HP0-Y37   HP0-Y37 examen   HP0-Y37   HP0-Y37   HP0-Y37

NO.5 Which statement is true about BGP Route Refresh? (Select two.)
A. Route Refresh is a feature for supported CPU functions with BGP routers that manage high number of
IP Prefixes.
B. Route Refresh is advertised as a BGP capability to BGP neighbors during BGP session
establishment.
C. BGP Route Refresh eliminates the need for a Hard Reset of the BGP connection with a BGP neighbor
when route policies are changed.
D. With Route Refresh, a BGP router stores all BGP prefixes sent by a BGP neighbor.
E. With Route Refresh, a BGP Hard Reset is used to generate inbound updates from a neighbor or to
generate outbound updates to a neighbor.
Answer: B,C

HP   certification HP0-Y37   HP0-Y37 examen

NO.6 You want to enable RRPP on interface Gigabit Ethernet 1/0/4 of an HP A-Series switch. Which
commands should be configured on this interface? (Select two.)
A. stp disable
B. rrrp ring 1 enable
C. port link-type trunk
D. port link-type rrpp
E. stp enable
Answer: A,C

HP   HP0-Y37   HP0-Y37 examen   HP0-Y37   certification HP0-Y37

NO.7 Click the Exhibit button.
You are replacing a Cisco BGP router with an HP A-Series BGP router. Examine the router's
configurations. Which statements accurately describe the routers' configurations? (Select three.)
A. Both configurations are identical in function.
B. The HP A-Series router will not implement the same BGP functions as the Cisco router.
C. Both BGP routers announce a static route to its BGP neighbor.
D. Both BGP routers announce network 215.34.10.0/22.
E. Neither BGP routers can announce a redistributed static route because no metrics are set.
F. The A-Series router's prefix list is misconfigured.
Answer: A,C,D

certification HP   HP0-Y37 examen   HP0-Y37   HP0-Y37   HP0-Y37

NO.8 DRAG DROP
Click the Task button. In a multihome AS, you are replacing one of the BGP-configured Cisco routers with
a BGP-configured HP A-Series router. You want to reduce the downtime during the migration process.
Place the steps for the migration in the correct order.
Answer:

NO.9 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The following are address
blocks chosen by the customers for each site as shown in the chart:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. Customer A uses a default route on each site. Customer B uses eBGP to exchange routes
with the provider. All MPLS layer-3 VPNs are functioning properly. Which configuration change will cause
Customer-A Site 1 to lose access to Customer-A Site 2?
A. [PE-1]
bgp 1
undo import-route static
B. [P-10]
ospf 1
area 0
abr-summary 16.0.0.2 30 cost 1000
C. [PE-1]
int vlan 100
undo mpls ldp
D. [PE-3]
bgp 1
undo peer 16.0.0.1 reflect-client
E. [P-10]
ip route static 10.1.0.0 16 null 0 preference 9
Answer: B

HP   HP0-Y37 examen   certification HP0-Y37   HP0-Y37

NO.10 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The address blocks chosen
by the customers for each site are shown in the following chart:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. A traceroute from Cust-A Site #1 to Cust-A Site #2 displays 5 intermediate routers.
Which statements are true? (Select three.)
A. MPLS label TTL expires on P-10.
B. TTL propagation is enabled on PE-1.
C. All but the first trace is processed by PE-2.
D. IP TTL expires on P-20.
E. PE-1 generates ICMP echo replies on behalf of P-10 and P-20.
F. TTL propagation is disabled on PE-1.
Answer: A,B,C

HP   HP0-Y37   HP0-Y37 examen   HP0-Y37

NO.11 Which statements are true about DHCP Snooping? (Select two.)
A. DHCP Snooping is a Cisco Proprietary protocol. The standard is not yet ratified.
B. DHCP Snooping prevents end nodes from receiving IP address assignments from an unauthorized
DHCP server.
C. DHCP Snooping is a malicious attack against the DHCP servers.
D. The DHCP Snooping binding table contains information about hosts interconnected with a trusted
interface.
E. DHCP Snooping is when a switch acts as a DHCP server for end nodes that connect to that particular
switch. This way, end nodes always get an IP address.
F. When configuring DHCP Snooping on a switch, you define which ports are trusted to receive DHCP
offers. Typically uplinks of a switch are trusted and Edge ports are untrusted.
Answer: B,F

HP   HP0-Y37   HP0-Y37 examen   HP0-Y37

NO.12 Which protocols are supported on the HP A-Series switch? (Select three.)
A. SSH v1 only
B. SSH v1 and v2
C. RADIUS only
D. TACACS+ and RADIUS
E. TACACS and RADIUS
F. SNMPv2c only
G. SNMPv2c and SNMPv3
Answer: B,D,G

HP examen   certification HP0-Y37   HP0-Y37   HP0-Y37 examen

NO.13 A company's LAN is composed of Cisco switches only. The network runs Rapid PVST+ with the short
pathcost method. Cisco distribution switches are set as root and secondary root in all VLANs. These two
switches connect over an Etherchannel. The company wants to install HP PoE switches at the edge of its
LAN. The customer wants to keep the load-balancing of traffic that is set in PVST+. What are the possible
options? (Select three.)
A. ensure Spanning Tree is disabled on the HP edge switch, and configure loop-protection on edge ports
to avoid local loops
B. if the HP edge switch is an A-Series switch, configure Smart Link with load balancing between
instances
C. if the HP edge switch is an A-Series switch, configure Rapid PVST+ on it
D. configure MSTP on the HP edge switch, but set the cost of its uplink higher than that on the channel
between the distribution switches
E. configure MSTP on the HP edge switch and divide the VLANs into different instances
F. configure MSTP on the HP edge switch and set its uplink port cost to 5
G. configure MSTP on the HP edge switch, but set the cost of its uplink lower than that on the channel
between the distribution switches
Answer: A,B,D

HP   certification HP0-Y37   HP0-Y37   HP0-Y37

NO.14 You want to add HP edge switches to a company's Cisco network. Distribution Cisco switches are set as
the Rapid PVST+ root and secondary root. You connect HP A-Series switches that are running their
factory default configuration to the two Cisco distribution switches. What will happen.?
A. If you connect the edge switch with a redundant link to both distribution switches, you create a loop and
a broadcast storm on the Cisco network.
B. Cisco distribution switches send tagged PVST+ BPDUs to the HP switch. Because 802.1q is not yet
configured on HP switch uplinks, the PVST+ BPDUs are dropped. A loop occurs.
C. Cisco distribution switches send untagged standard BPDUs to the HP switch in VLAN 1, and in
response the HP switch blocks one of the uplinks on all VLANs, preventing a loop.
D. Cisco distribution switches send untagged standard BPDUs to HP switch in VLAN 1, which the HP
switch forwards to the other distribution switch, preventing a loop. The HP switch drops all tagged data
frames.
Answer: D

HP   HP0-Y37 examen   HP0-Y37   HP0-Y37   HP0-Y37

NO.15 Which statements about BPDU Guard are correct? (Select three.)
A. It is a Cisco proprietary protocol that prevents other switches from sending BDPUs.
B. BPDU Guard filters the standard BDPUs received on the port.
C. BPDU Guard filters the PVST BDPUs received on the port.
D. BPDU Guard generates an alarm when a BPDU is received on the port and may block the port.
E. BPDU Guard is an open standard.
F. BPDU Guard is not a protocol. It must be applied locally and individually on switches.
Answer: B,D,F

HP examen   HP0-Y37   HP0-Y37   certification HP0-Y37   certification HP0-Y37

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test HP HP0-Y37. Votre argent sera tout rendu si vous échouez le test.