2014年3月2日星期日

Le matériel de formation de l'examen de meilleur Juniper JN0-303

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test JN0-303 est lequel très important dans les tests de Certification Juniper. Pour être qualifié de Juniper, on doit obtenir le passport de test Juniper JN0-303.

Pour vous laisser savoir mieux que la Q&A Juniper JN0-303 produit par Pass4Test est persuadante, le démo de Q&A Juniper JN0-303 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Juniper JN0-303 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Juniper JN0-303. Ce ne sera pas un problème à réussir le test Juniper JN0-303 si vous préparez le test avec notre guide d'étude.

Code d'Examen: JN0-303
Nom d'Examen: Juniper (Juniper networks Certified internet specialist.m(jncis-m))
Questions et réponses: 150 Q&As

Le test Juniper JN0-303 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

JN0-303 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-303.html

NO.1 In what PIM topology would you use MSDP within a single domain?
A. Auto-RP
B. Anycast RP
C. Bootstrap router
D. PIM sparse mode
Answer: B

Juniper   JN0-303 examen   certification JN0-303

NO.2 An OSPF non-backbone area allows external routes to be flooded within the area. These external
routes are
propagated into other areas. However, external routes from other areas are not allowed to enter this area.
Which type of
OSPF area does this describe?
A. stub area
B. transit area
C. border area
D. not-so-stubby area
Answer: D

Juniper   JN0-303   JN0-303 examen   JN0-303

NO.3 When comparing CPE and provider-provisioned VPNs (PPVPN), which two statements are true?
(Choose two.)
A. CPE VPN's require dedicated VPN aware hardware at customer site, PPVPN does not.
B. PPVPN's require dedicated VPN aware hardware at customer site, CPE VPN's does not.
C. CPE VPN's scale better than PPVPN's as they do not require a per site configuration on the CPE.
D. PPVPN's scale better than CPE VPN's as they do not require a per site configuration on the CPE.
Answer: AD

Juniper   JN0-303 examen   JN0-303

NO.4 What is the Draft-Kompella control plane based on?
A. IGP
B. LDP
C. BGP
D. MPLS
Answer: C

Juniper   JN0-303 examen   JN0-303 examen   JN0-303

NO.5 Which LSA is the Type 10?
A. Router LSA
B. Opaque LSA
C. AS attributes LSA
D. ASBR summary LSA
E. Network summary LSA
Answer: B

Juniper examen   JN0-303   JN0-303 examen   JN0-303 examen

NO.6 Which JUNOS software operational-mode command displays the status of a Draft-Martini VPN?
A. show ldp neighbor
B. show martini connections
C. show l2circuit connections
D. show l2vpn connections
Answer: C

Juniper examen   JN0-303 examen   JN0-303 examen

NO.7 What is the administrative scoping address range associated with global scope?
A. 224.0.0.0/24
B. 239.128.0.0/10
C. 239.192.0.0/14
D. 224.0.1.0?38.255.255.255
Answer: D

certification Juniper   JN0-303   certification JN0-303   JN0-303   JN0-303

NO.8 What are two commands that can be used to configure MBGP for multicast? (choose two)
A. Under the BGP group, configure family inet any
B. Use the set protocol MBGP command to enable MBGP
C. Under the BGP group, configure family inet multicast
D. Use the set rib-group command to copy the multicast routes into inet.1
Answer: AC

Juniper examen   JN0-303   JN0-303 examen   certification JN0-303

NO.9 What prevents routing loops when MSDP is configured across multiple domains?
A. PIM-SM
B. Scoping
C. Auto-RP
D. MBGP
Answer: D

certification Juniper   JN0-303   JN0-303   JN0-303   JN0-303   certification JN0-303

NO.10 In JUNOS software, which three are valid encapsulation types for CCC? (Choose three.)
A. hdlc-ccc
B. atm-cell-ccc
C. cisco-hdlc-ccc
D. ethernet-vlan-ccc
E. ethernet-snap-ccc
Answer: BCD

certification Juniper   JN0-303   certification JN0-303

NO.11 In JUNOS software, what is required to redistribute RIP routes into OSPF?
A. Apply an export policy in RIP.
B. Apply an import policy in RIP.
C. Apply an export policy in OSPF.
D. Apply an import policy in OSPF.
Answer: C

Juniper   JN0-303 examen   JN0-303 examen   JN0-303 examen

NO.12 Which two multicast groups support Auto-RP mapping and discovery? (Choose two.)
A. 224.0.0.39
B. 224.0.1.39
C. 224.0.0.40
D. 224.0.1.40
Answer: BD

certification Juniper   JN0-303 examen   JN0-303 examen   JN0-303   JN0-303 examen

NO.13 PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP's must
be established to support 2547bis?
A. an LSP for each local CE device
B. an LSP for each remote PE device
C. an LSP for each remote CE device
D. an LSP for each CE facing interface
Answer: B

Juniper examen   JN0-303 examen   JN0-303

NO.14 In JUNOS software, which type of VPN supports IPX and Appletalk?
A. Martini based VPN's
B. 2547bis based VPN's
C. Sham link based VPN's
D. Virtual Router based VPN's
Answer: A

Juniper examen   certification JN0-303   JN0-303   JN0-303   JN0-303   JN0-303

NO.15 Which represents a correct PE-PE BGP configuration for an L3 VPN?
A. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
neighbor 192.168.16.1;
}
B. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
any;
}
neighbor 192.168.16.1; }
C. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
neighbor 192.168.16.1;
}
D. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
13-vpn;
}
neighbor 192.168.16.1;
}
Answer: C

certification Juniper   JN0-303   certification JN0-303   JN0-303   JN0-303   JN0-303

NO.16 Which two mechanisms control route distribution between PE routers in a 2547bis VPN? (Choose
two.)
A. Site ID
B. Policies
C. Circuit ID
D. Extended communities
Answer: BD

Juniper   certification JN0-303   certification JN0-303

NO.17 Which three RP election mechanisms are available in a PIM-SM domain? (Choose three.)
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
Answer: ABD

Juniper   JN0-303 examen   certification JN0-303   JN0-303 examen   JN0-303 examen

NO.18 What are three examples of a provider-provisioned VPN supported by JUNOS software? (Choose
three.)
A. L2F
B. PPTP
C. Circuit cross-connect
D. Draft-Martini-based VPNs
E. Draft-Kompella-based VPNs
Answer: CDE

certification Juniper   JN0-303   JN0-303

NO.19 Which multicast mode does Auto-RP require?
A. Link-mode
B. Dense mode
C. Sparse mode D. Sparse-dense mode
Answer: D

certification Juniper   certification JN0-303   certification JN0-303   JN0-303   certification JN0-303   certification JN0-303

NO.20 Which two steps are required for a Kompella Layer 2 VPN? (Choose two.)
A. Configure a site ID for each CE
B. Configure a VPN label for each VPN
C. Configure a MP-BGP session to each PE
D. Configure an Extended LDP Session to each PE
Answer: AC

Juniper examen   JN0-303   JN0-303   certification JN0-303   JN0-303

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Juniper JN0-303 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

没有评论:

发表评论