Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test IBM 000-733 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
Dans cette Industrie IT intense, le succès de test IBM 000-733 peut augmenter le salaire. Les gens d'obtenir le Certificat IBM 000-733 peuvent gagner beaucoup plus que les gens sans Certificat IBM 000-733. Le problème est comment on peut réussir le test plus facile?
Code d'Examen: 000-733
Nom d'Examen: IBM (IBM Certified Application Developer-DB29)
Questions et réponses: 140 Q&As
Il y a nombreux façons à vous aider à réussir le test IBM 000-733. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test IBM 000-733 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test IBM 000-733 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.
Vous n'avez besoin que de faire les exercices à propos du test IBM 000-733 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification IBM 000-733, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification IBM 000-733. Peut-être d'obtenir le Certificat IBM 000-733 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
Choisir le Pass4Test peut vous aider à réussir 100% le test IBM 000-733 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification IBM 000-733. Il n'y a pas de soucis à réussir le test avec une haute note.
000-733 Démo gratuit à télécharger: http://www.pass4test.fr/000-733.html
NO.1 After installing the DB2 Express-C 9 it was discovered that the Development Workbench was not
available. What
was the reason for that?
A. It must be installed separately.
B. It is not supported with DB2 Express-C 9.
C. Since it is a licensed tool, it must be purchased from IBM.
D. Review the DB2 installation log for errors. Reinstall DB2 Express-C 9.
Answer: A
IBM examen 000-733 examen 000-733 000-733
NO.2 A table named ACTIVITY.LOG was created by executing the following statement:CREATE TABLE
activity.log (event VARCHAR(128), date DATE) Then, a stored procedure named ACTIVITY.LOGEVENT
was created by executing the following statement: CREATE PROCEDURE activity.logEvent(IN stmtType
CHAR(1)) LANGUAGE SQLMainBody: BEGIN DECLARE sqlerrm VARCHAR(256) DEFAULT '';
DECLARE ErrorIndicator CHAR(1) DEFAULT 'N';
SQLStmt: BEGIN
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION
BEGIN
SET ErrorIndicator = 'Y';
END;
IF stmtType = 'I' THEN
INSERT INTO activity.log VALUES('Insert Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'U' THEN
INSERT INTO activity.log VALUES('Update Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'D' THEN I
NSERT INTO activity.log VALUES('Delete Operation Performed.', CURRENT_DATE);
ELSE
SET ErrorIndicator = 'Y';
END IF;
END SQLStmt;
IF ErrorIndicator = 'Y' THEN
SIGNAL SQLSTATE '70000' SET message_text = 'Could not update activity log.';
END IF;
END MainBody
User USER1 has the authority to access/manipulate data in the ACTIVITY.LOG table as well as to invoke
the
procedure ACTIVITY.LOGEVENT. If user USER1 executes the following commands:
CONNECT TO sample USER user1 USING ibmdb2;
DELETE FROM activity.log;
CALL activity.logEvent('i'); What will be the results?
A. The string "Insert Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
B. The string "Update Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
C. The string "Delete Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
D. The error message 'SQL0438N Application raised error with diagnostic text: "Could not update activity
log.".SQLSTATE=70000' will be generated.
Answer: D
certification IBM 000-733 certification 000-733 certification 000-733
NO.3 Which of the following ADO .NET providers is supported by IBM DB2 Add-ins for Visual Studio?
A. OLE DB .NET Data Provider
B. DB2 Data Provider for .NET
C. ODBC Data Provider for .NET
D. DB2 for i5/OS .NET Provider
Answer: B
certification IBM certification 000-733 000-733 000-733 examen 000-733 000-733
NO.4 Given the following table definition:CREATE TABLE staff ( id SMALLINT NOT NULL, name
VARCHAR(9), dept SMALLINT, job CHAR(5)) Assuming that the following statements execute
successfully:Dim cmdStaff As DB2Command = cnDb2.CreateCommand() cmdStaff.CommandText =
"SELECT name FROM staff WHERE (job = @job)" Which of the following is the correct way to provide a
value for the parameter marker used?
A. cmdStaff.Parameters.Add("@job", "Mgr", CType(5, Char))
B. cmdStaff.Parameters.Add("@job", "Mgr", DB2Type.Char, 5)
C. cmdStaff.Parameters.Add(New DB2Parameter("@job", CType(5, Char))
cmdStaff.Parameters("@job").Value = "Mgr"
D. cmdStaff.Parameters.Add(New DB2Parameter("@job", DB2Type.Char, 5)
cmdStaff.Parameters("@job").Value ="Mgr"
Answer: D
certification IBM 000-733 000-733 examen 000-733
NO.5 Given following table:
EMP
EMPNO NAME DEPTNO SALARY
=====
==== ======
======
0010 JOSH D95 30000
0020 JENNA D98 25000
0030 DYLAN
D95 10000
0040 TRACY D90 33000
and the following trigger definition:CREATE TRIGGER track_chgsAFTER UPDATE OF salary, name,
empno ON emp REFERENCING NEW_TABLE AS ntable FOR EACH STATEMENT MODE
DB2SQLBEGIN ATOMIC INSERT INTO changes SELECT empno, CURRENT TIMESTAMP FROM
ntable; END; After executing the following SQL statements:DELETE FROM changes; UPDATE emp SET
deptno = 'D98' WHERE deptno = 'D95'; INSERT INTO emp VALUES('0050', 'KEN', 'D90', 35000);
UPDATE emp SET salary = salary - 500 WHERE salary > 35000;UPDATE emp SET salary = salary +
1000 WHERE salary <= 25000;What value will be returned by this query?SELECT count(*) FROM
changes
A. 2
B. 3 C. 4
D. 6
Answer: A
IBM 000-733 certification 000-733 000-733
NO.6 Which of the following restrictions pertains to embedded SQL external routines?
A. Environment variables with names that start with 'DB2' are not allowed.
B. Executing statements or commands that are connection related is not allowed.
C. Environment variable values that were set before the DB2 database manager is started are not
available.
D. When returning result sets from external nested stored procedures, a cursor cannot be opened with
the same name onmultiple nesting levels.
Answer: B
IBM 000-733 certification 000-733 certification 000-733 000-733
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.7 Which of the following is a characteristic of an application that uses a Distributed Unit of Work
(DUOW)?
A. A single transaction can only read and/or modify data stored on one database server.
B. Multiple transactions can only read and/or modify data stored on one database server.
C. A single transaction can read and/or modify data stored across multiple database servers.
D. Multiple transactions can read and/or modify data stored on multiple database servers provided each
transaction only accesses a single server.
Answer: C
certification IBM 000-733 000-733 000-733 examen
NO.8 Table EMPLOYEE contains the following rows: EMPNO FIRSTNME LASTNAME WORKDEPT
000010.CHRISTINE HAAS A00 000020 MICHAEL THOMPSON B01 000030 SALLY KWAN C01 The
isolation level for Application 1 is set to CS and autocommit is disabled. The isolation level for Application
2 is set to CS and the autocommit is enabled. The following statements are executed in sequence:
Application 1:
DECLARE c1 CURSOR FOR SELECT * FROM employee ORDER BY empno OPEN C1 FETCH C1
FETCH C1 Application 2:
UPDATE employee SET lastname = 'MILLFORD' WHERE empno = '000020' Which of the following
statements is correct?
A. The UPDATE succeeds because Application 2 runs with autocommit enabled so no row level locks are
necessary for the update.
B. The UPDATE succeeds because Application 1 holds a row level lock that is compatible with the lock
required by Application 2.
C. The UPDATE fails because Application 1 holds a row level read lock that is in conflict with the lock
required by Application 2.C.
D. The UPDATE fails because the row level locks held by Application 1 have been escalated to table lock
so updates by other connections are disallowed.
Answer: B
IBM 000-733 000-733 certification 000-733 000-733 examen
NO.9 An SQL procedure has been developed with several inline SQL PL statements encapsulated in a
dynamic compound SQL statement. The procedure had been tested and performed well. After making a
change to the last SQL statement the procedure not only failed to complete, but did not produce output
from any statements which were not modified. What is the best explanation for this behavior?
A. The dynamic compound SQL is atomic.
B. The procedure doesn't have any savepoints.
C. The procedure has not been correctly re-cataloged.
D. The dynamic compound SQL individual statements are logically dependent on each other.
Answer: A
IBM examen certification 000-733 000-733 examen
NO.10 Which of the following is a SQL stored procedure which will return a resultset containing ID, NAME,
DEPT and JOB values out of the STAFF table?
A. CREATE PROCEDURE result_set() LANGUAGE SQL BEGIN SELECT id, name, dept, job FROM
staff; END
B. CREATE PROCEDURE result_set LANGUAGE SQL RESULT SETS 1 BEGIN SELECT id, name,
dept, job FROM staff; END
C. CREATE PROCEDURE result_set RESULT SETS 1 BEGIN DECLARE c1 CURSOR FOR SELECT id,
name, dept, job FROM staff; OPEN C1; END
D. CREATE PROCEDURE result_set()
LANGUAGE SQL RESULT SETS 1 BEGIN DECLARE c1 CURSOR WITH RETURN FOR SELECT id,
name, dept, job FROM staff; OPEN c1; END
Answer: D
certification IBM certification 000-733 000-733
NO.11 Which of the following SQL statements demonstrates the correct usage of a parameter marker?
A. SELECT ? FROM SYSCAT.TABLES
B. SELECT [] FROM SYSCAT.TABLES
C. SELECT CAST(? AS INTEGER) FROM SYSCAT.TABLES
D. SELECT CAST([] AS INTEGER) FROM SYSCAT.TABLES
Answer: C
IBM 000-733 examen 000-733 certification 000-733 certification 000-733 000-733 examen
NO.12 Which of the following is the DB2 Data Provider for the .NET class that requires a database connection
to be open?
A. DB2DataSet
B. DB2RecordSet
C. DB2DataReader
D. DB2DataAdapter
Answer: C
IBM 000-733 000-733 000-733
NO.13 Given the following table and view definitions: CREATE TABLE city ( cityid INT GENERATED
ALWAYS AS IDENTITY , city_name CHAR(10), state_code CHAR(2) CHECK(state_code IN
('CA','IL','NY','OH','TX')));CREATE VIEW city_view AS ( SELECT city_name||','||state_code AS fullname
FROM city WHERE state_code NOT IN ('OH','IL')); and the following trigger definition:CREATE
TRIGGER city_viewInput INSTEAD OF INSERT ON city_view REFERENCING NEW AS nFOR EACH
ROW MODE DB2SQLBEGIN ATOMIC DECLARE delim INT;SET delim = LOCATE(',', n.fullname);
INSERT INTO city(city_name,state_code) VALUES(SUBSTR(n.fullname, 1, delim - 1),
SUBSTR(n.fullname, delim + 1, 2));END; If the following SQL statments are executed:INSERT INTO city
VALUES(DEFAULT,'San Jose','CA') ; INSERT INTO city_view VALUES('Chicago,IL'); INSERT INTO city
VALUES(DEFAULT,'Detroit','MI'); INSERT INTO city VALUES(DEFAULT,'Austin','TX'); INSERT INTO
city_view VALUES('Denver,CO'); How many rows will be returned by the following query: SELECT *
FROM city
A. 1
B. 2
C. 3
D. 4
Answer: C
IBM 000-733 000-733 certification 000-733
NO.14 If the following code is executed in the order shown:conDB2 As
DB2ConnectionconDB2.ConnectionString =
"Database=samplelx;UID=db2user;PWD=db2pwd;"conDB2.Open() Which of the following statements is
correct?
A. An exception is thrown because the server name has not been specified.
B. An exception is thrown because the server name and the port have not been specified.
C. The execution is successful provided the host name SAMPLEX has been previously defined in the
local hosts table.
D. The execution is successful provided the database alias SAMPLEX has been previously defined in the
local database catalog.
Answer: D
IBM 000-733 examen 000-733
NO.15 A .NET application executes a SQL request invoking the DB2Command.ExecuteReader method and a
syntax errorexception is thrown. Which of the following properties contains the SQLCode for this syntax
error?
A. DB2Error.SQLCode
B. SQLError.SQLCode
C. DB2Exception.SQLCode
D. SQLException.SQLCode
Answer: A
IBM examen 000-733 examen 000-733
NO.16 An application running against a DB2 for AIX database needs to execute the following query:SELECT
t2.c2, t1.c3 FROM t1 INNER JOIN t2 ON t1.c1 = t2.c1 If table T1 resides in the DB2 for AIX database and
table T2 resides in a DB2 for i5/OS database, which of the followingDB2 object types must the identifier
T2 represent in order for this SQL statement to run successfully?
A. ALIAS
B. NICKNAME
C. SERVER TABLE
D. TABLE WRAPPER
Answer: B
certification IBM 000-733 examen 000-733 000-733 examen
NO.17 What is the minimum privilege required to run a User Defined Function (UDF)?
A. CALL
B. EXECUTE
C. SYSCTRL
D. SYSMAINT
Answer: B
IBM 000-733 certification 000-733 000-733 000-733
NO.18 Parameter markers are NOT permitted for which of the following statements?
A. CALL
B. DELETE C. EXECUTE IMMEDIATE
D. SET CURRENT SQLID
Answer: C
IBM examen 000-733 examen 000-733 examen
NO.19 After executing the following SQL statements: CREATE TABLE tab1 ( col1 INT ,col2 CHAR(1),
PRIMARY KEY(col1)); CREATE TABLE tab2 ( col1 INT ,col2 CHAR(1), FOREIGN KEY (col1)
REFERENCES tab1(col1) ON DELETE CASCADE ON UPDATE NO ACTION ); INSERT INTO tab1
VALUES(1, 'A'); INSERT INTO tab1 VALUES(2, 'B'); INSERT INTO tab2 VALUES(3, 'A'); INSERT INTO
tab2 VALUES(2, 'B'); UPDATE tab1 SET col1 = col1 + 1;DELETE FROM tab1 WHERE col2 = 'B';
What values will be returned by the following SQL query?SELECT col1, col2 FROM tab1 A.COL1 COL2
==== ==== 2 'B'
A. COL1 COL2 ==== ==== 2 'B'
B. COL1 COL2 ==== ==== 2 'A'
C. COL1 COL2 ==== ==== 1 'A' 2 'B'
D. COL1 COL2 ==== ==== 2 'A' 3 'B'
Answer: B
certification IBM 000-733 000-733
NO.20 Two OLTP applications run concurrently but frequent locking occurs which requires a fix to be applied.
Application A inserts rows into the table T1. Application B submits several queries against the table with a
Cursor Stability isolation level. What would be the best course of action to improve the system's
concurrency and performance?
A. Application B should be changed to access a view of table T1.
B. Application B should be changed to a Read Stability isolation level.
C. Application A should be changed to perform a commit after each INSERT operation.
D. Application A should be changed to include the NOT WITH HOLD clause on each INSERT operation.
Answer: C
IBM 000-733 000-733 000-733
Pass4Test est un site à offrir particulièrement la Q&A IBM 000-733, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification IBM 000-733, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test IBM 000-733 et même se renforcer vos connaissances professionnelles IT.
没有评论:
发表评论