Le test Microsoft MB7-516 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft MB7-516 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft MB7-516.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Microsoft MB7-516 est une bonne examination. Mais c'est difficile à passer le test Microsoft MB7-516. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Microsoft MB7-516 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.
Code d'Examen: MB7-516
Nom d'Examen: Microsoft (NAV 5.0 C/SIDE Solution Development)
Questions et réponses: 90 Q&As
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Microsoft MB7-516. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
MB7-516 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-516.html
NO.1 When must the SourceExpr property be populated for a Label control?
A. When the Label control is bound to a Textbox control
B. Never, there is no such property for Label controls
C. Only when the control is placed on an unbound form
D. When the ParentControl property of the Label control is set to the Source Table
Answer: B
Microsoft examen certification MB7-516 MB7-516 certification MB7-516 MB7-516 examen
NO.2 Select the SETFILTER line that is equivalent to: Customer.SETRANGE('No.', LowValue, HighValue);
A. Customer.SETFILTER('No.', '%1|%2', LowValue, HighValue);
B. Customer.SETFILTER('No.', LowValue, HighValue);
C. Customer.SETFILTER('No.', '%1..%2', LowValue, HighValue);
D. Customer.SETFILTER('No.', LowValue..HighValue);
Answer: C
Microsoft MB7-516 examen MB7-516 MB7-516 examen MB7-516 examen
NO.3 What is the result of executing the following commands, where Number is a variable declared of the
datatype Record
and subtype Integer? Number.Number := 10; Number.MODIFY;
A. The Number field of the current record stored in the Number variable will be changed to 10 in the
database.
B. A compile error will occur before the commands can be executed.
C. A run-time error will occur.
D. Record number 10 in the Integer table will be deleted and a new record inserted.
Answer: C
certification Microsoft MB7-516 MB7-516 examen MB7-516 examen certification MB7-516 MB7-516
NO.4 Form A calls a function in a Single Instance Codeunit and populates a global text variable with the
value "Red." Then, Form B calls the same function and populates the same text variable with the value
"Blue." Which of the following is TRUE if Form A were to then call another function in the same Single
Instance Codeunit and retrieve the same global text variable?
A. The value of the text variable is "Red."
B. The value of the text variable is "Blue."
C. The text variable contains a null value.
D. A LOCKTABLE error occurs.
Answer: B
certification Microsoft MB7-516 examen MB7-516 MB7-516 examen certification MB7-516
NO.5 What can be determined from viewing the following C/AL command?
CustProcessCode.Update(Customer);
A. A variable has been declared with the name CustProcessCode, the variable refers to a complex data
type, and the object referred to contains a function named Update.
B. The Customer table will be updated if the command is executed.
C. The Customer table has a function named Update.
D. A variable named CustProcessCode has been declared with a subtype of Codeunit, and has a function
that updates the Customer table.
Answer: A
Microsoft MB7-516 certification MB7-516
NO.6 You are writing code in C/SIDE. Assuming that you are in a transaction, which of the following ends a
transaction?
A. EndTrans
B. Commit
C. StartTrans
D. PostTrans
Answer: B
certification Microsoft certification MB7-516 certification MB7-516 certification MB7-516
NO.7 When upgrading MenuSuites, if a menu item has been added to a menu group that is no longer a part
of the upgraded MenuSuite, what happens to the menu item?
A. The menu item is deleted.
B. The menu item is placed in a Lost Items group at the bottom of the menu tree.
C. The menu item is placed in a Deleted Items group.
D. The menu item is highlighted at the top of the menu tree.
Answer: B
Microsoft MB7-516 examen MB7-516 MB7-516 examen
NO.8 Which of the following is not true regarding Complex Data Types?
A. Complex data types have properties.
B. Complex data types have methods.
C. Addition or subtraction functions can be performed on complex data types.
D. Complex data types must be declared as either a global or local variable.
Answer: C
Microsoft MB7-516 examen MB7-516 examen MB7-516 examen
NO.9 Which of the following is TRUE regarding exporting of MenuSuite objects?
A. MenuSuite objects can be exported in either MenuSuite (mns) or text (txt) format.
B. MenuSuite objects can only be exported in text (txt) format.
C. MenuSuite objects cannot be exported.
D. MenuSuite objects can be exported in either object (fob) or text (txt) format.
Answer: D
Microsoft MB7-516 MB7-516 MB7-516
NO.10 Under which circumstances is it possible to run a report in a modal fashion while in the middle of a
Transaction?
A. If the Request Form is shown modally before the report
B. If the report prepopulates all the needed information on the Request Form before it is displayed
C. If the Request Form is not shown
D. If the report has already been run once and the request form was properly filled in
Answer: C
Microsoft MB7-516 MB7-516
NO.11 Which of the following is not a valid target for the WRITELINE method of an OutStream type variable?
A. BLOB
B. File
C. Report
D. Automation
Answer: C
Microsoft examen MB7-516 examen certification MB7-516
NO.12 Which of the following is not a valid reason to apply Grouping in a Microsoft Dynamics NAV report?
A. To cause the report to print a new page for each Salesperson when printing a list of Customers
B. To print a subtotal of the Balance field for each Salesperson when printing a list of Customers C. To
cause two or more Customer reports to print simultaneously for each Salesperson
D. To cause the report to print a sub-heading each time the Salesperson code changes when printing a
list of Customers
Answer: C
Microsoft MB7-516 certification MB7-516
NO.13 Which of the following commands is best to use in C/AL to change a closing date to a normal date?
A. NORMALIZEDATE
B. COMPRESSDATE
C. WORKDATE
D. NORMALDATE
Answer: D
Microsoft certification MB7-516 MB7-516 MB7-516
NO.14 Which statement best describes how MenuSuite object changes are stored?
A. Each change is stored as a complete list of MenuSuite menus and items and replaces the previous
level.
B. Changes are stored as the difference between the previous MenuSuite level and the current one.
C. Only one MenuSuite level is stored which consists of all menu items.
D. MenuSuite changes are not stored.
Answer: B
Microsoft certification MB7-516 MB7-516
NO.15 How can an element of an object be addressed in code?
A. Through an instance of the class definition
B. Through the normal syntax of a structured language
C. By using the dot operator
D. By using a pointer reference
Answer: C
Microsoft examen certification MB7-516 MB7-516 certification MB7-516
NO.16 In a Function, when a parameter is specified as Var, it means:
A. The parameter is passed as a variant.
B. The parameter is passed by value rather than reference.
C. The parameter has variable lengths.
D. The parameter is passed by reference rather than value.
Answer: D
Microsoft MB7-516 MB7-516 certification MB7-516 MB7-516
NO.17 Which of the following is true regarding NODBC and multi-language capability?
A. NODBC is not multi-language enabled.
B. Only the Table Name is multi-language enabled.
C. The Table Name, Field Name, and OptionString values are multi-language enabled.
D. Only the data is multi-language enabled.
Answer: C
certification Microsoft MB7-516 examen MB7-516 MB7-516 examen MB7-516
NO.18 Which of the following controls cannot be contained in a subform?
A. Picturebox
B. Subform
C. Tablebox
D. Tab Control
Answer: B
certification Microsoft MB7-516 MB7-516 MB7-516
NO.19 Which of the following is a valid FILE function?
A. TRUNCATE
B. BINARYMODE
C. EXISTS
D. WRITELINE
Answer: C
Microsoft MB7-516 examen MB7-516 certification MB7-516 MB7-516
NO.20 Which property on a Subform control determine the form to be displayed?
A. FormID
B. SourceDataLink
C. SubFormID
D. SubFormLink
Answer: C
certification Microsoft MB7-516 examen certification MB7-516
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft MB7-516, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
没有评论:
发表评论