Participer au test HP HP0-Y33 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat HP HP0-Y33 symbole bien la professionnalité d'un travailleur dans cette industrie.
HP0-Y33 est un test de HP Certification, donc réussir HP0-Y33 est le premier pas à mettre le pied sur la Certifiction HP. Ça peut expliquer certiainement pourquoi le test HP HP0-Y33 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test HP0-Y33. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?
Le test Certification HP HP0-Y33 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test HP HP0-Y33. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test HP HP0-Y33.
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test HP HP0-Y33 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test HP HP0-Y33 à se preuver. Mais le taux du succès et bien bas. Participer le test HP HP0-Y33 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Code d'Examen: HP0-Y33
Nom d'Examen: HP (Implementing HP Wireless Networks)
Questions et réponses: 97 Q&As
Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test HP HP0-Y33 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test HP HP0-Y33 est le rêve pour les professionnels ambitieux.
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification HP HP0-Y33. Le guide d'étude de Pass4Test comprend les excercices de HP HP0-Y33 et la Q&A qui peut vous permetrre à réussir 100% le test HP HP0-Y33. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
HP0-Y33 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y33.html
NO.1 In your existing wireless network you have a variety of E-MSM controllers. Which products are capable
of supporting teaming? (Select two.)
A. E-MSM710
B. E-MSM730
C. E-MSM750
D. E-MSM760
E. E-MSM765zl
Answer: D,E
HP HP0-Y33 HP0-Y33 examen certification HP0-Y33
NO.2 Your controller's Team Manager has suffered a catastrophic failure and an Interim Manager has been
selected. Which action is required to allow the Interim Manager to distribute a new software release to its
team members?
A. The Interim Manager is promoted to Team Manager status.
B. The Interim Manager is rebooted and reconfigured as the new Team Manager.
C. The Interim Manager promotes another team member to Team Manager and the new TeamManager
uploads the new software to the team members.
D. Each Team Member is manually upgraded from the Interim Manager.
Answer: A
certification HP HP0-Y33 HP0-Y33 HP0-Y33 certification HP0-Y33
NO.3 An HP E-MSM760 Controller receives untagged traffic on its LAN port from a wireless client associated
with an access point from another manufacturer. In a WLAN configured with VSCs 1-4, which VSC will be
selected to pass this traffic?
A. VSC 2
B. VSC 3
C. VSC 4
D. default VSC
Answer: D
HP HP0-Y33 certification HP0-Y33 HP0-Y33
NO.4 When would the IP address of the Internet port on an MSM controller be set to "No Address"?
A. when NAT is enabled
B. when only authenticated traffic is passing through the Internet port
C. when NAT is disabled
D. when only VLAN traffic is passing through the Internet port
Answer: D
HP certification HP0-Y33 HP0-Y33 HP0-Y33 examen
NO.5 .What are the major benefits of creating a team of controllers? (Select two.)
A. controller redundancy
B. Flow support
C. local DHCP support
D. PPTP client and server support
E. single IP management of all team controllers
Answer: A,E
HP HP0-Y33 examen HP0-Y33 HP0-Y33 HP0-Y33
NO.6 When configuring the MSM controller for a controlled mode network, at which point is the AP's VSC
egress VLAN configured?
A. when the Group is created
B. when the AP is synchronized with its Group
C. when the specified VLAN is created
D. when the VSC is bound to the Group
Answer: D
HP certification HP0-Y33 HP0-Y33
NO.7 After completing the configuration and synchronization of all team members, you discover through your
initial testing that your APs cannot associate with your team controllers. To solve this problem what should
you check?
A. that your VSC DHCP parameters are set correctly
B. that you have enabled your local DHCP server on your Team Manager (controller)
C. that an external DHCP server exists and is operational on your network
D. that DHCP Relay has been configured on all your team members (controllers)
Answer: C
HP examen HP0-Y33 HP0-Y33 examen HP0-Y33
NO.8 In order to create a new VLAN in an MSM controller configuration, which path should you take to
access the correct screen?
A. VSCs>[select a VSC]>VSC Profile
B. VSCs>VSC bindings>VLANs
C. Controller>Management>VLANs
D. Controller>Network>Ports
Answer: D
HP HP0-Y33 HP0-Y33 HP0-Y33
NO.9 On a VSC, which Traffic Type options can be specified for egress VLANs? (Select three.)
A. default gateway traffic
B. IP filtered traffic
C. authenticated traffic
D. untagged traffic
E. intercepted traffic
F. unauthenticated traffic
Answer: C,E,F
HP certification HP0-Y33 HP0-Y33 examen HP0-Y33 HP0-Y33 examen
NO.10 A financial institution needs to deploy 80 access points in their new building. Since the institution is not
interested in purchasing additional wired switches for their LAN infrastructure, which solution should be
recommended to manage the access points?
A. HP A3000-24G-PoE+ Wireless Switch
B. HP A-WX5002 Access Controller
C. HP A-WX5004 Access Controller
D. HP A7500/E7900 Access Controller Module
Answer: C
HP certification HP0-Y33 HP0-Y33 HP0-Y33 HP0-Y33 examen
NO.11 Click the Exhibit button.
You have deployed a guest wireless service in the reception area of a marketing firm. The clients
associated with the guest service should be assigned to VLAN 10. When you test the configuration,
clients are being assigned IP addresses in the 192.168.0.0 subnet. You view the access controller
configuration shown in the exhibit.
Which command resolves the issue by correctly associating VLAN 10 with the appropriate interface.?
A. [sysname-wlan-st-1] port access vlan 10
B. [sysname-WLAN-ESS1] port access vlan 10
C. [sysname-GigabitEthernet1/0/1] port access vlan 10
D. [sysname-Vlan-interface10] port access vlan 10
Answer: B
HP HP0-Y33 HP0-Y33
NO.12 In the configuration of an E-MSM760 controller, you find that the default VSC is access controlled.
Which statements are true about an inbound packet on the LAN port which does not have a VLAN tag?
(Select two.)
A. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
B. The packet is associated with that VSC if the packet has a known SSID tag.
C. The packet is dropped as the LAN port will only accept VLAN tagged packets.
D. The packet is associated with the default VSC if it has no matching SSID tag.
E. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
Answer: B,D
HP examen HP0-Y33 certification HP0-Y33 certification HP0-Y33 certification HP0-Y33
NO.13 When Centralized Access Control is configured as Automatic, when is a user data tunnel created?
A. when more than one controller is on the network that has the same access control configuration
B. when tunnels are manually configured and available
C. when IPSec is set up between two controllers
D. when a synchronized AP and its controller are on different subnets
Answer: D
HP examen certification HP0-Y33 HP0-Y33 examen HP0-Y33 examen
NO.14 What is the maximum number of E-MSM controllers that can be configured into a single team?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: E
certification HP HP0-Y33 HP0-Y33 examen HP0-Y33 HP0-Y33 HP0-Y33
NO.15 which feature should you enable to enhance Layer 2 (L2) roaming?
A. seamless roaming
B. rapid authentication
C. WPA2 Opportunistic Key Caching
D. single network AP hopping
Answer: C
HP examen certification HP0-Y33 HP0-Y33 HP0-Y33 certification HP0-Y33
Le test HP HP0-Y33 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.
没有评论:
发表评论